• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Hebei, China (Mainland)
  • Brand Name: TUOFA
  • Model Number: hook
  • quality of the line hardware: prequalified line hardware
  • weight of the line hardware: 3.5kg line hardware
  • Craft of line hardware: hot forged line hardware
  • material line hardware: malleable cast iron
  • Galvanized of the line hardware: hot-dip galvanized line hardware
  • surface of line hardware: uniform and smoothline hardware
  • rated failure load line hardware: 45kn mininum line hardware
  • thinkness of the zinc line hardware: more than 80 micron line hardware
  • Applicable standard line hardware: ISO1461 Overhead line accessories
  • certificate of the line accessories: ISO9001

Packaging & Delivery

Packaging Details line hardware
Sacks or cartons
Delivery Time 5-7days


contact stella

if you hav interest pls contact stella now~


16mm and 70kn ball hook transmission line accessories:

Malleable cast Iron
70KN Min load

  line hardware pictures: 

line hardware Dimensions:


The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones.


line hardware GALVANIZATION


The fittings shall be delivered hot dip galvanized according to the following specifications:


  • The Zinc that shall be used shall have the quality of minimum category prime western according to  the category Zn 98.5 according to ISO-1461.
  • Then washed out with water and then flux treated and dried out.
  • The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.
  • The galvanization thickness shall be in average 86μm thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.
  • The pieces shall be after HDG free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The HDG shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.
  • The galvanization shall stick very well on the steel structure; it shall not be removed as a film but shall be as one with the steel body


line hardware  Drawing


 line hardware Testing:

The fittings shall be fixed in a mechanical testing device as similar as possible with the assembly later during use.





Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $30,000
Learn More