tie strap angle Electric power fitting-11/33kv Cross arm for KENYA/Saudi/Chile power tender
we are the manufcturer with ten years experience.
It is used to link clamps to insulator, or to link insulator and ground wire clamp to tower or sujection stucture. It has special type inaccordance with mounting condition.
There will no sharp edges, and corners rounded. All items will be clean rust free, smooth and uniform throughout and will also be free from burrs.
· The Zinc of the electric power fitting:
the category Zn 98.5 according to ISO-1461.
· Then washed out with water and then flux treated and dried out.
· be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.
· The galvanization thickness-- in average 86μm thick
minimum thickness shall be 78μm
the average weight shall be 610 gr/m2.
electric power fitting PACKING:
All materials of the electric power fitting shall be packed in wooden / bags cases of maximum weight of every wooden box 25 kg.
The wooden cases shall be suitable for the transport of the pieces without damaging the galvanization, and shall allow air to
circulate and the used wood shall be completely dry in order to avoid any corrosion of the fittings.
if you hav interest pls contact stella now ~